DigiPlus

In daily office and DigiPlusstudy, remote desktop connection can help us work and collaborate efficiently in different places. However, when using the Windows 7 operating system, we will find that sometimes the remote desktop connection cannot be connected, which causes us trouble. There are many reasons why remote desktop connection cannot be connected, which may be network settings, computer hardware driver problems, remote desktop service not started, etc. Next, I will give a detailed introduction to these problems and provide solutions. I hope it can help you.I. Network setting problems Network setting problems are a common factor that causes remote desktop connection. When connecting to a remote desktop, it is necessary to ensure that the local computer and the target computer are in the same local area network, otherwise the connection will fail. Solution: 1. Check whether the network connection is normal. You can connect another computer or mobile phone to the same network to see if you can access the Internet. Two. Check whether the target computer is connected to the network normally. You can open the cmd window on the target computer, enter the ping plus IP address, and see if it can be successfully pinged. 3. Turn off the firewall. Some firewalls will prevent remote desktop connections, and you need to turn off the firewall to connect successfully. In Windows 7, it can be set through the Windows Firewall in the control panel.Four. Check whether the router settings are correct. Sometimes incorrect router settings will also affect the remote desktop connection. You can try to restart the router or check the router settings. II. Computer hardware driver problems Computer hardware driver problems are also one of the reasons for the inability to connect to the remote desktop. For some old computers, there may be a problem of insufficient compatibility with Windows 7, which will lead to the failure of remote desktop connection. Solution: 1. Install the complete driver. Especially for the graphics card driver, the correct version must be installed, otherwise hardware compatibility cannot be ensured. Two. Upgrade the operating system. If the computer is old, consider upgrading to Windows 10, which is easier to solve hardware compatibility problems. III. If the remote desktop service is not started, the remote desktop connection needs the support of the remote desktop service. If the service is not started, the remote desktop connection cannot be made.Solution: 1. Start the remote desktop service. Find "Remote Desktop Service" in "Service" and then start it. Two. Verify whether the remote desktop has been started. You can find the "Service" column in the task manager to see if there is a "remote desktop service". The above are some common reasons for the inability to connect to the remote desktop and the corresponding solutions. The inability to connect to the remote desktop is often caused by a detailed problem. As long as you patiently troubleshoot the problem, you can find a solution to make the remote desktop connection smoother.

Contact Us
Phone：020-83484610